B&O MMC2 rebuild
From: Ian Fenn
Sent: Thursday, December 24, 2020 1:56 AM
To: Peter Ledermann
Subject: Re: RA21634 B&O MMC2
Thank you very much
the cartridge(B&O MMC2) has been fitted to the tone arm( SME 3009 improved S2 fixed head-shell; effective mass 6.5g) when I set the anti skate( using an unpressed record) I found at the indicated(1g) setting on the arm the cart just sat exactly where it landed on the turning record. One notch either side it would drift in/out. I am guessing that's better than expected. I sounds extremely good. A couple of photos... first is of the cart after it was installed, second is the TT
ll
