Modified Cartridges

What are the causes of Sibilance?

Sibilance can be caused by many aspects of analog vinyl replay.

Click here to read the full answer

How Do I Set The Azimuth Adjustment On My Cartridge?

Azimuth adjustment is important

Azimuth (part 1, part 2)

Click here to read the full answer

How Do I Adjust Anti-skating On My Cartridge?

Yes You Do Need Antiskating

Anti-Skating (part 1, part 2)

It is just plain simple physics. BUT……the industry has gotten it WRONG. (see my notes at the end of this anti-skating message for more details)

Click here to read the full answer

How Do I Set My Cartridge's Overhang Adjustment?

This adjustment provides a best compromise for your “pivoting” arm – it will minimize distortion if done correctly. Please either open the attachment and print it out, OR go to the following website and print out this free overhang gauge – instructions are fairly easy and on the print out itself – PLEASE note if you download the one with the metric grid at the bottom of the gauge, and make sure you have printed it out sized correctly. If not, you may have to enlarge or reduce a bit. I use photo quality paper for my final print out, which make a durable gauge!

Click here to read the full answer

They Said What?

“When the needle dropped on the lead groove, it started showing off immediately. The Paua II was giving me more image solidity than I’d heard before. Images were more three dimensional and alive, more palpable.”